Jump to content

mikan

Members
  • Posts

    4453
  • Joined

  • Last visited

Posts posted by mikan

  1. Mä oon järkyttynyt! 😳    Siis kun itse aina kipuilen, kun pitää autoon tehdä joku pieni hitsaushomma. Millään ei jaksaisi ruosteen kanssa touhuta ja sitten samaan aikaan toisaalla intoa piukassa otetaan tuollainen folioruttu työn alle. Ihailtavaa tekemistä! 👍

  2. Joku Sambassa ei myöskään ole tuota uskonut:

     

    "The gauge should be marked 6V or 12V, usually with an ink stamp on the back. The date code will also be stamped, and only '67 gauges are 12V.

    It will make a little difference because 12V gauges have a slightly higher internal resistance. Something close to an 82 ohm resistor is added internally in a 12V gauge.

    There is no difference in the sender for 6V or 12V but the gauge is different by the added resistor. I recommend adding an 80 to 100 ohm 1 watt resistor in series with the power lead externally if you're using a 6 volt gauge on 12 volts. 6 volt gauges will eventually die on 12 volts, but it usually takes them awhile."

×
×
  • Create New...